●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●-211径-θκ11.4510.8811.1710.3610.919.8810.39910.48.989.377.489.317.345.156.944.686.424.122.41111111111111111111144444444444444444444.ファイン（F）刃形NDCDSMNOCD【Note】If the workpiece has draft angle, the interference length will be longer than the under-neck length.Please refer to the effective under-neck length for the various draft angles. In addition, the angle at which the tool will interfere with the workpiece is shown as the ''interference angle θκ'', and should also be referred to.■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■PlaningDie-sinkingProfilingRadiusRest MaterialMachiningMiniature■■■■■FinishingRibMiniature■■θκ刃長FlutelengthAPMX0.120.120.180.180.240.240.30.30.360.360.480.480.60.60.60.90.91.21.21.2首径Neck dia.全長OveralllengthLF505050505050505050505050505050505050505532,670 34,280 32,670 34,280 29,680 31,490 29,680 31,490 27,430 29,250 27,430 29,680 27,430 29,250 30,320 28,500 31,490 28,500 31,490 38,460 CBN-EPSB2002-0.5-FCBN-EPSB2002-1-FCBN-EPSB2003-0.75-FCBN-EPSB2003-1.5-FCBN-EPSB2004-1-FCBN-EPSB2004-2-FCBN-EPSB2005-1.5-FCBN-EPSB2005-3-FCBN-EPSB2006-1.5-FCBN-EPSB2006-3-FCBN-EPSB2008-2.5-FCBN-EPSB2008-5-FCBN-EPSB2010-2.5-FCBN-EPSB2010-5-FCBN-EPSB2010-10-FCBN-EPSB2015-5-FCBN-EPSB2015-10-FCBN-EPSB2020-5-FCBN-EPSB2020-10-FCBN-EPSB2020-20-F首R＝R1首下長0.10.20.150.30.20.40.250.50.30.60.40.80.50.751.5【注意】寸法 Size （mm）首下長Under necklengthLU0.510.751.5121.531.532.552.551051051020外径Tool dia.商品コードItem codeCBN-EPSB2002-0.5-SCBN-EPSB2002-1-SCBN-EPSB2003-0.75-SCBN-EPSB2003-1.5-SCBN-EPSB2004-1-SCBN-EPSB2004-2-SCBN-EPSB2005-1.5-SCBN-EPSB2005-3-SCBN-EPSB2006-1.5-SCBN-EPSB2006-3-SCBN-EPSB2008-2.5-SCBN-EPSB2008-5-SCBN-EPSB2010-2.5-SCBN-EPSB2010-5-SCBN-EPSB2010-10-SCBN-EPSB2015-5-SCBN-EPSB2015-10-SCBN-EPSB2020-5-SCBN-EPSB2020-10-SCBN-EPSB2020-20-S【基本推奨】 F刃型：L/D（首下長/外径）≦5、S刃型：L/D（首下長/外径）＞5【Basic recommendation】 F type : L/D(under neck length/tool dia.)≦5, S type : L/D(under neck length/tool dia.)＞5首下詳細形状●印：標準在庫品です。 ●：Stocked Items. 干渉なし：No interference.エポックCBNスーパーボールエンドミル外径実測値付き0.71.240.991.791.252.311.783.361.783.362.835.482.845.510.955.5310.985.5611.0121.90.721.281.021.831.292.371.833.461.823.462.895.722.895.7411.445.7511.465.7711.4822.880.751.321.051.881.322.431.873.621.863.612.995.9935.9911.98611.986.0111.9923.96加工物に勾配がついている場合、干渉領域は、首下長さよりも長くなります。それぞれの勾配角に対する実有効首下長をご参照ください。また、工具が加工物に干渉する角度を、干渉角度θκで表示していますので合わせてご参照ください。Strong (S) type在庫StockEpoch CBN Super Ball End MillFine (F) typeボール半径Ball radius在庫StockREDC１２°60Under Neck Length商品コードItem codeDetailed shape below neckNeck RDisplay of actual measured mill dia. for all toolsREAPMXLU※外径実測値をケースに表示していますActual measured tool diameter value is shown on case.シャンクDN0.180.180.270.270.370.370.470.470.570.570.770.770.960.960.961.441.441.921.921.92Shank dia.DCONMSNeck R首R Neck R全数外径実測値表示Includes actual measured tool diameter value.±0.005実有効首下長The effectiveunder-necklength勾配角Draft angleLF干渉角度Interferenceangle（°）首R0.5°1°1.5°2°3°0.80.671.381.191.10.952.031.731.381.212.682.2521.733.993.281.981.733.973.283.282.766.65.333.282.776.65.3413.2310.56.585.3613.2210.546.565.3813.210.58干渉なし21勾配角に対する実有効首下長Effective under neck lengthwith respect to draft angle希望小売価格（￥）Suggestedretailprice(￥)干渉角度θκInterferenceangle-S/FCBN-EPSB2ストロング（S）刃形
元のページ ../index.html#64