123esu fo redrOesu fo redrOesu redrO fo4444681012●●●●44446810124444446810121416●●●●●●●●●●使用順使用順使用順on sideBHTA1(0.51)(0.38)(0.30)(0.25)on sideBHTA1(1.04)(0.76)(0.60)(0.50)(0.42)(0.37)on sideBHTA1(1.02)(0.75)(0.60)(0.49)Top surface width: 0.9mm上面幅：0.9mmDepthUp to12mmTop surface width: 1.0mm上面幅：1.0mmDepthUp to12mmTop surface width: 1.2mm上面幅：1.2mmDepthUp to16mm深さ12mmまで上面幅Top surface width：0.9mm深さDepth11mm底幅0.8mmBottom width深さ12mmまで深さ16mmまで工程Process 1商品コードItem code在庫StockECRB0810-6-PNECRB0810-8-PNECRB0810-10-PNECRB0810-12-PN工程Process 2寸法Size (mm)刃長大端径Large edge dia.ボール半径Ball radius外径Tool dia.※完成したリブ溝の勾配面には、わずかな角度差が生じます。事前に問題ないかご確認お願いします。上面幅Top surface width：0.9mm6→8→10mm商品コード在庫StockECRB0809-6-PNECRB0809-8-PNECRB0809-10-PNECRB0809-12-PN商品コード在庫StockECRB1012-6-PNECRB1012-8-PNECRB1012-10-PNECRB1012-12-PNECRB1012-14-PNECRB1012-16-PN上面幅Top surface width：0.9mm深さDepth11mm底幅0.8mmBottom width寸法Size (mm)大端径刃長ボール半径Ball radius外径Tool dia.RE0.40.40.40.4DC0.80.80.80.8DCX0.90.90.90.9RE0.40.40.40.4DC0.80.80.80.8DCX1.01.01.01.0寸法Size (mm)大端径刃長ボール半径Ball radius外径Tool dia.RE0.50.50.50.50.50.5DC111111DCX1.21.21.21.21.21.20.9mm深さDepth11mm上面幅を加工する工程と底幅を加工する工程を組み合わせるコンビネーションリブ加工！！Combination rib machining can combine the process for machining the top surface width and the process for machining the bottom width.完成！Completedシャンク径Shank dia.DCONMS全長刃部テーパ半角Taper angle74上面幅0.9㎜・底幅0.8㎜・深さ11㎜のリブ溝の場合。For a rib groove with an top surface width of 0.9 mm, a bottom width of 0.8 mm, and a depth of 11 m【例】加工形状【Ex.】Shape to be machinedご使用方法 Method of use底幅0.8mmBottom width: 0.8mm底幅0.8mmBottom width: 0.8mm底幅1.0mmBottom width: 1.0mm上記アイテムの刃長の短い順に6㎜⇒8㎜⇒10㎜を用いて往復切削にて加工を行う。加工深さ＝刃長としてください。大端径は全て0.9㎜のため、リブ溝の上面幅の0.9㎜が加工できます。Perform machining by reciprocating cutting using the above items in order starting with the shortest flute length: 6 mm => 8 mm => 10 mm. Set machining depth = Flute length. Since all of the items have a large edge diameter of 0.9 mm, the 0.9 mm width of the top surface of the rib groove can be machined.リブ溝の上面幅とエンドミルの大端径・リブ溝の底幅とエンドミルの外径が同じものを刃長別に短いものから順にご使用ください。左記の上面幅0.9mm・底幅0.8mmのリブ溝は下記４アイテムをご使用ください。Use end mills having the same large edge diameter as the rib groove's top surface width and the same tool diameter as the rib groove's bottom in sequence starting with the shortest flute length. For making the rib groove shown at right with a top surface width of 0.9 mmand bottom width of 0.8 mm, the following four items should be used.左記の上面幅1.0mm・底幅0.8mmのリブ溝は下記４アイテムをご使用ください。For making the rib groove shown at right with a top surface width of 1.0 mm and bottom width of 0.8 mm, the following four items should be used.左記の上面幅1.2mm・底幅1.0mmのリブ溝は下記6アイテムをご使用ください。For making the rib groove shown at right with a top surface width of 1.2 mm and bottom width of 1.0 mm, the following 6 items should be used.Item codeItem code上記アイテムの刃長12㎜を用いて、深さ11㎜まで往復切削を行う。ボール半径が0.4㎜のため、底幅0.8㎜が加工できます。Using the item above with a flute length of 12 mm, perform reciprocating cutting to the depth of 11 mm.Since the ball radius is 0.4 mm, the bottom width of 0.8 mm can be machined.Large edge dia.※Slight differences in the angle of the taper surface of completed rib grooves may occur. Whether or not they will be a problem should be checked beforehand.Large edge dia.Flute lengthOverall lengthFlute lengthOverall length上面幅・底幅・深さが高精度に加工できているため、ヒケやショートショットも生じにくいリブ溝が完成。抜け方向の勾配もしっかりついています。Since it is possible to machine the top surface width, bottom width, and depth with high accuracy, rib grooves with sinks or short shots are unlikely to occur can be completed. The taper in the release direction is also firmly maintained.Flute lengthOverall lengthシャンク径Shank dia.DCONMS全長刃部テーパ半角Taper angleAPMXLF60606060APMXLF60606060刃部テーパ半角Taper angleシャンク径Shank dia.DCONMS全長APMXLF606060606060
元のページ ../index.html#78